Smiley face
PiqBookmark
 
FinishFirstStiles

 

Milling/Shaping/Edging
Premium Products

Stiles Machinery Inc.Stiles Machinery Inc.
Brandt Ambition 1110F

Brandt by Stiles Machinery introduces the Ambition 1110F entry-level edge bander for small to medium sized shops that specialize in cabinetry, closet organizers, displays or case goods. It features a joint trimming unit for optimum edge joint quality. It has an adjustable infeed fence for exact adjustment of the joint trim value and is equipped with a precision gluing unit and coil magazine to control the amount of glue ... read more...

Homag KAL 500 single-sided edgebander

The Homag KAL 500 single-sided edgebander, available from Stiles Machinery, is best suited for manufacturing environments producing commercial casework, components, cabinets and closets. The KAL 500 is capable of applying coiled material from .3 to 3 mm and can run strip material like HPL and wood strips up to 5mm thick as well. It also has adjustable feed speeds ranging from 18 m./min. - 32 m./min. and smaller panel ... read more...

Homag KAL Series Edgebanders

The Homag KAL series, available in the U.S. from Stiles Machinery, is tailored specifically to meet the demands of today's production needs, featuring four pre-configured models with a wide selection of options for all levels of automation and every size operation. From the KAL 200 which provides high speed and repeatable application of thin coiled material to the KAL 800 that offers fully automated changeovers on all edge ... read more...

Show More
HOMAG PRINT LINE EDGEBANDER

The Homag Print Line, available exclusively from Stiles Machinery, revolutionizes the edgebanding design process through technology that allows for the application of any color or pattern via a print technique that has never been accomplished previously. This new technology supports lean manufacturing principles by eliminating the need for multicoil edgeband magazines, extensive material inventory, procurement and handling ... read more...

Kentwood Advanced Series The Kentwood Advanced Series, available through Stiles Machinery, is tailored specifically to meet high-volume production requirements. 100391698 read more...

Kentwood Elite Series

Kentwood Elite Series The Kentwood Elite Series, available through Stiles Machinery, is tailored specifically for heavy industrial applications requiring heavy stock removal. 100391705 read more...

Kentwood M509

Kentwood M509 Stiles Machinery introduces the Kentwood M509, a serious production moulder. Individual motors on all five spindles deliver generous horse power to each spindle to provide production flexibility and high quality cuts. The large cutting circles on the M509 enable processing of deeper profiles. HighRes-Root:203:09-2006:100373323.tif read more...

Kentwood M609

The Kentwood M609, available from Stiles Machinery, is a moulder for processing deeper and more intricate profiles. The additional top spindle as well as the short pad shoe on the first top head enables more intricate profile processing. Increased horse power for each of the individual motors on all six spindles allows deeper profile processing. The Kentwood M609 features automatic bed lubrication, which reduces operating ... read more...

Kentwood M609X

Kentwood M609X The Kentwood M609X, available through Stiles Machinery, is a machine designed to produce intricate mouldings in record time. Maximum horse power is delivered to each of the individual motors for all six spindles and increased spindle rpms permit faster feed speeds to produce an excellent finished product. Automatic bed lubrication reduces operating friction and assures consistent material feeding. Special ... read more...

Kentwood moulders

Kentwood moulders, available through Stiles Machinery, produce better mouldings with improved efficiency, smoother surfaces and greater productivity, the company says. The sturdy, high-quality machine design ensures increased accuracy and trouble-free performance. Each series in the Kentwood line is tailored specifically to meet unique production requirements. The Professional Series the Kentwood M409, M509 and M609 is ... read more...

Kuper ACR-CrossRunner

Kuper introduces the ACR-CrossRunner, a crossfeed veneer splicer for the production of small furniture pieces as well as short-grain panels or door skins. The machine is offered with three working widths (800 mm, 1200 mm and 1600 mm) and is available with different stacking systems. Easy-to-understand buttons, regulators and a touch-panel screen enable simple operation. The CrossRunner is a welcome addition for any facility ... read more...

Torwegge DET 400

Torwegge DET 400 The Torwegge DET 400 series, is a solid wood double end tenoner designed for traditional sizing, tenoning and dadoing of various material from solid wood to plywood and gypsum board. Optional units provide corner rounding, angular cutting, sanding, splitting and other unique applications. The DET 400 provides flexibility and has the capability to groove between the chains with automatic set-up (CNC ... read more...

Torwegge Double End Tenoner

Aimed at the laminate flooring market, the Torwegge TRANSAIR double end tenoner reaches speeds up to 200 m/min (650 fpm) on a cushion of air instead of a feed chain. It can length profile 1,200mm (48-in.) pieces at a rate of 150 p/min, the company says. Torwegge is distributed exclusively by Stiles Machinery. read more...

Torwegge tenoners

Torwegge tenoners Torwegge GmbH of Löhne, Germany, is renowned not only for the quality equipment it manufactures, but also for its focus on performance technology and specialized engineering solutions. One of those innovations is the Transair system. Different from the traditional means of processing a part through the tenoner, which utilizes a bottom chain, Transair incorporates an air flotation system. A second ... read more...

Vector Revolution 180

In one continuous process, the Vector Revolution 180 applies edgebanding to shaped components and also trims and scrapes at the same time. The Revolution can operate in two 4' x 6' zones for processing small to large parts. With cycle times under two minutes, the contour edgebander consistently produces quality parts, including 360 degree lap joints. The patented process is controlled by a simple and intuitive interface ... read more...

Thermwood Corp.Thermwood Corp.
Fravol edgebanders

The Smart series is a compact edgebander for applying thin / thick PVC, melamine, veneer, high-pressure laminate, and solid wood edges in strips or rolls. The Smart series edgebander is designed to be compact, versatile and user-friendly. The machine has separate cabins for the glue pot and the working units are viewable through windows. Changing glue color or cleaning is easier with the Quick Release Teflon lined glue ... read more...

K75 G edgebander

Therm O Web?s K75 G edgebander Therm O Web?s K75 G glue pot compact automatic edgebander sets the standard for price and performance. It applies materials in coil or strips up to 2mm, flush end trim, top and bottom trimming with high frequency motors and six blade combination trim heads. read more...

The M80 Carver is designed and built specifically for the production carving of flat and three dimensional components such as posts and legs. The M80 comes standard with eight 12 HP, 24,000 RPM spindles for a full 96 HP of carving power. Each spindle has an automatic tool changer and each can access up to eight individual tools. All eight spindles can machine parts up 14 inches in diameter and up to 56 inches long. Even ... read more...

Standard Products

Danckaert Woodworking Machinery Co.

Moulding ' Machining Center by Celaschi Danckaert Woodworking Machinery Co. carries Celaschi's "PA" linear moulding and machining center. Called the Model C13-91, it comes with electronic or CNC controls and can ... read more...

Danckaert Woodworking Machinery Company offers the Celashi TSA C31-99 double-end tenoner and Progress single-end tenoner. The multi-function machines including sizing, tenoning, profiling, boring, mortising, ... read more...

Danckaert offers the Celaschi C18-91 tenon machine. The company's profilers, single and double end tenoners are available with contour, corner rounding straight disk and belt sanding units which offer quick set up ... read more...

Show More

Celaschi C22-92 Danckaert's Celaschi double and single end tenoners are designed to offer precise squaring and sizing features along with shaping and/or sanding. With programmable sizing adjustments as fast as 30 ... read more...

Danckaert single-end tenenor The Danchaert Woodworking Machinery Company offers the Celaschi C2-92 single-end tenenor, which utilizes two transport chains thereby producing similar results as a double-end ... read more...

Moulding ' Machining Center by Celaschi Danckaert Woodworking Machinery Co. carries Celaschi's "PA" linear moulding and machining center. Called the Model C13-91, it comes with electronic or CNC controls and can ... read more...

Stemas 2000, 3000, and 4000 Series Danckaert is proud to announce the "2000, 3000, and 4000" Series; Shape and Sand, from Stemas. These machines will be configured with 2 to 4 motors allowing the customer to ... read more...

The "TSG-J" by GMC Service is a Standard Double End Tenoner with a fixed base. This machine allows for a total of 8 (4 + 4) motors. This machine can still be equipped with most motors allowing for the ... read more...

Veneer flattening machines Through years of study, Simimpianti has developed the uniquely advanced technology contained in their line of veneer flattening machines. By using a one-opening through feed pressing ... read more...

Nordson UV

Nordson's MiniEdge The MiniEdge edgebanding system is an entry-level alternative to traditional open glue roller systems when applying EVA hot melt adhesives. The nozzle design delivers quick, accurate coating ... read more...

SAC Group USA

The SAC T3, T4, T4TL and T5 tenoners have an infeed length of 1980mm, with feed speeds from 3 to 45 mt/min. and support for up to three stations. The saw motor is 7.5 hp; the tenon spindle motor is available in ... read more...

Toptronic shapers from SAC SAC GROUP USA?s new shapers, the Toptronic-1 and Toptronic-2, have been designed to address problems common to all shaping machines. The 12-hp Toptronics are variable speed, driven by ... read more...

SAC USA?s Vitap Quartz edgebander SAC USA?s Vitap Quartz edgebander is for use with pre-glued banding materials up to 2.5mm high, including strips, coils and solid wood. Panels automatic feed at 2 to 12 m/min. It ... read more...

Edgetech, Inc.

Edgetech's postformers are designed to produce a wide range of store fixture components (shelving, cabinet door/drawer faces, vertical panels, work surfaces) as well as countertops, furniture, geoform shapes and ... read more...

Koch Machinery & Systems

Front 10 from Koch The front 10, from Koch Machinery ' Systems, is equipped with vertical drilling units from both the top and bottom. The Front 10 can be easily programmed to bore through the drawer front for ... read more...

Koch introduces the Sprint-MT-45 - CNC Mortise and Tenon Machine for Cabinet Door Components. It streamlines your door production and assembly process allowing the machine to mortise and tenon one door at a time. ... read more...

KOCH MACHINERY + SYSTEMS offers the Trim-Pro double-end tenoner. The Trim-Pro feed system rides on linear guides for maximum accuracy with automatic lubrication. Heavy-duty construction, easy and precise ... read more...

Wintersteiger

Wintersteiger offers an upgraded version of its DSG 150 thin cutting frame saw, the DSG 150 HT. Used for cutting slate (lamella) from solid wood blocks with a minimum of saw kerf waste, the 150 HT offers features ... read more...

The DSB Singlehead thin cutting band saw from Wintersteiger has the perfect technology to meet the most demanding requirements for flexibility and performance for sawing of wood blocks into lamellas for engineered ... read more...

The DSB Twinhead thin cutting band saw from Wintersteiger has the perfect technology to meet the most demanding requirements for flexibility and performance for sawing of wood blocks into lamellas for engineered ... read more...

Show More

The Wintersteiger DSG 200 thin cutting frame saw, from Ogden Enterprises, Inc., is used for cutting slate (lamella) from solid wood blocks with a minimum of saw kerf waste. The Wintersteiger saws use multiple ... read more...

Wintersteiger's thin cutting technology achieves optimum results in the production of high-quality lamellas for engineered floors, doors, architectural windows, multilayer boards, furniture and many other uses. A ... read more...

ÿ mach 1.4 from Wintersteiger The thin-cutting circular saw mach 1.4 was specially developed for the production of high quality lamellas and high capacity. The modular design allows the machine to be suited to ... read more...

Wintersteiger thin cutting frame saw Give your engineered product a solid facelift. With Wintersteiger engineering you can have a solid sawn veneer while recovering a 20 percent better yield. Our thin cutting ... read more...

Larick Machinery, Inc.

Larick 410 Shaper/Sander LARICK'S 410 SHAPER/SANDER features standard variable speed on the shaper, sanders and 6-in. wide feed conveyor. Floating stations allow arched panels to be both shaped and sanded. The ... read more...

Model 390 Ultimate Shaper from Larick The Larick Model 390 Ultimate Shaper is conveyor fed, making it ideal for shaping small parts which could not be shaped with a conventional power feeder. This 7 1/2-hp ... read more...

Larick Model 410 shaper/sander Larick Machinery Inc. offers the Model 410 shaper/sander, which has a 6-in. wide feed chain with four staggered rows of hold-down tires. The variable speed machine also ... read more...

Mini Max USA

Formula SP1 from Mini Max The SP1 from Mini Max offers the small workshop hi-performance and maximum safety. The work table is mounted on four, large-diameter, highly stable screws. It features helical grooved ... read more...

The ME15 is an automatic edgebander designed for applying pre-glued tapes ranging in thickness from .4mm to 2mm. Reliable and easy-to-use, the ME15 has a "Leister" blower with variable electronic temperature ... read more...

The ME30HF Edgebander, Mini Max USA's edgebander line, covers all the needs of the small- to medium-sized shops. Hot air or glue-pot machines are available. Each machine offers durability and a compact size. read more...

WoodEye North America

The WoodEye Hardwood Grading according to NHLA rules is a Challengers Award winner. This product is a production ready wood scanner for hardwood that makes it possible to automate the lumber grading process. All ... read more...

Stone Tucker Instruments Inc.

Delmhorst Pin-type Moisture Meters are designed to measure moisture content in various species of wood. J-4 measures 6 to 30 percent moisture with an analogue read-out; J-2000 has a digital display, corrects for ... read more...

PosiTector DewPoint Meter Measures relative humidity, air temperature, dewpoint and surface temperature simultaneously, to ensure optimum environmental circumstances for coating application. PosiTector DPM is ... read more...

MRH by Tramex measures moisture content from 3 to 40 percent in wood. MRH is a non-destructive digital meter with adjustable specific gravity from 0.3 to 0.8 to suit most wood species. Optional probes are ... read more...

Weinig America, Inc.

The OptiCut S-90 is equipped with Dimter's OptiCom Direct control and an easy-to-use touch screen so that all the operator's tasks can be accomplished with ease. Switching between different jobs is as simple as ... read more...

Dimter supplies high-speed cross-cutting systems for all manufacturing requirements. Opticut saws provide top reliability, maximum possible safety, accuracy and ease of use. Dimter produces the latest computer ... read more...

The forerunners of the new Hydromat 1000 have been the most popular high speed moulders in the North American market. Space-saving and compact, the Hydromat 1000 can run up to 200 fpm. Both the five- and ... read more...

Show More

The Hydromat 2000 has all the advantages of the Hydromat 1000, but runs at speeds up to 330 fpm, with a working width of 11 in. This model runs extra wide material faster, but also has the finesse to run small ... read more...

Weinig offers the Hydromat 23, which has nine spindles, an infeed of 6-60 m/min and runs at 6,000 r/m. The vertical spindles of the Hydromat are equipped with a profile jointer, the horizontal spindles with a ... read more...

Hydromat 23 Crown moulder Michael Weinig, Inc. offers the Hydromat 23 Crown moulder, which will be featured at the company's booth during IWF '98. The Hydromat 23 Crown is equipped with a cast iron base and can ... read more...

Maxiplan 30 planer form Weinig Weinig offers the Maxiplan 30 planer, which is specifically designed for producing a high quality surface finish required when machining large cross-section beams for interior use ... read more...

Powermat Moulder from Weinig Group Weinig has achieved a decisive technology leap with its new Powermat generation. The main feature is the new HSK tooling, developed and patented by Weinig. It is now possible to ... read more...

The Powermat 1000 has all the advantages of the new generation of moulders while offering great performance and ample flexibility. The standard version is well equipped, but there are hundreds of available ... read more...

The Powermat 400 has most of the features of the bigger moulders efficiently contained in a smaller package. With the WEINIG Memory System (standard equipment) in combination with PowerLock technology, the ... read more...

With PowerLock tool holders for fast setup, and a choice of automatic control packages from the simple Memory System to the PowerCom controller with networking to the tool room and other Powercom machines the ... read more...

Weinig Powermat generation For a long time the moulder market has been characterized by minor improvements. Now, Weinig has achieved a decisive technology leap with the its new Powermat generation. The main ... read more...

Powermat Moulder Class A new leap in moulder technology, the Weinig Powermat Series offers an extensive range of efficient and easy-to-use machines. Designed to produce large and small runs alike, it is now ... read more...

The Powermat Series offers productivity without limits, all from one source all from WEINIG. Accomplishing setup in no time at all becomes the daily routine via manageable, compact cutterheads. Fast processing ... read more...

Profimat 23E by Michael Weinig Michael Weinig, Inc. introduced the Profimat 23E, a moulder it designed for custom woodworkers. The machine is made with a close-coupled, cast-iron frame. It is easier to set up and ... read more...

Weinig Profimat 26 Super moulder Michael Weinig offers the Profimat 26 Super moulder, which is design for custom woodworkers. The Profimat 26 Super comes in 5- and 6-spindle versions, and offers the ... read more...

Michael Weinig moulder The Quattromat 23 P moulding machine, from Michael Weinig AG, is equipped with 4 spindles and has a working width of 13 to 230 mm and a height capacity of 6 to 120 mm. Weinig also offers ... read more...

The new Raimann EconoRip 310 ripsaw is distinguished by its robust design, ease of operation and flexibility. The new ripsaw offers features found in high-end ripsaws at a very economical price, the company says. ... read more...

Raimann's patented QuickFix arbor ensures rapid changeovers. Simple to use and flexible enough for today's just-in-time ripping production requirements. With one or two moving blades, ProfiCut controls and ... read more...

Raimanns ProfiRip KR optimizing ripsaws are robust production machines with feed speeds up to 264 fpm. ProfiRip KR ripsaws can be configured with arbors from 12 to 24 in. wide. With the option of two to six ... read more...

Several gang ripsaw operators have experienced serious injuries due to kickbacks on gang saws since their introduction in the early 1960s. The steel fingers used to prevent kickbacks have worked well to prevent ... read more...

Weinig Unimat 1000 Star moulder Weinig offers the Unimat 1000 Star moulder, which is designed to accommodate numerous spindle configurations. The Unimat 1000 Star has spindle speeds of op to 8,000 rpm and feed ... read more...

Weinig Group Unimat 2000 "Turbo" The latest moulder from the Weinig Group, the Unimat 2000 "Turbo," is built with flexibility in mind ? with 10,000 rpm, HSK PowerLock cutterheads, and jointers. With 10,000 rpm, ... read more...

Unimat 23 E moulder from Weinig Michael Weinig offers the Unimat 23 E moulder, which is designed for producing small and medium batches. In addition to automated tool setting, the 8.000 rpm spindle ... read more...

Unimat 23EL from Weinig Michael Weinig offers the Unimat 23EL moulder, which will be exhibited at the Anaheim Woodworking Fair linked to a Uniplan finish planing machine as well as a Unicontrol 6 window ... read more...

Michael Weinig Unimat The Unimat 30 EL planer/moulder from Micheal Weinig, Inc. features a working width of 12 in. The moulder is equipped with solid spindle mounts, hydraulically clamped outboard ... read more...

The Unimat 500 moulder can be equipped with more horsepower and larger cutting circles for deeper profiles. With eight available models equipped with from five to eight spindles, the Unimat 500 can be configured ... read more...

The Unimat 800 is specifically designed for the small shop budget, but is built with the capacity for large profiles. With 8,000 rpm spindles, large 9 7/8-in. cutting circles and time-proven Weinig features, this ... read more...

WEINIG's Unimat Gold is easy to set up and easy to run. Available in 5- and 6-spindle configurations, the Unimat Gold features 6,000 rpm spindle speed, up to 75-hp motors to handle the largest profiles, feed ... read more...

The Weinig Group has a new generation of Unimat moulders to make small and medium run production profitable. Offered in several different models, they are individually designed to meet your demands, and all ... read more...

There are more Unimat Series machines in service worldwide than any other moulder ever built. Flexible, small footprint, and easy to operate, the Unimat Series are the perfect solution for small shops and short ... read more...

Weinig's new Valu-Rip Plus will get the best value from the material, in the correct quantity and at the right time. Seventeen points measure board width and determine board shape and crook. This allows the ... read more...

The Variomat from Weinig is a moulder that can handle four-sided profiling and then finish cuts the end of the workpiece. Using the multifunction table, this four- or five-spindle moulder is transformed into a ... read more...

When only high-speed production will meet the customer's needs, Weinig and WACO have the answers. Select from an application-oriented product range - from the popular Hydromat 1000 to the power package Powermat ... read more...

Michael Weinig, Inc. offers the Waco-Dominant moulder. The machine features a pneumatic chip breaker, built-in jointer and a standard computer setting system. The Waco-Dominant operates at speeds of up to 500 fpm. ... read more...

Michael Weinig, Inc. offers the Waco-Maxi as high-speed planer/moulder. The machine is designed for planing/moulding at speeds up to 660 fpm. It handles wood as wide as 12" and as thick as 6". A ... read more...

The CNC-controlled Conturex Profiling Center by Weinig features new processing technology such as the grip-feed table with the PowerGrip, a function where elements are clamped to the grip-feed table and held in ... read more...

The patented WEINIG PowerLock System uses no spindle, no spacers and no wrenches making mistakes difficult to make. The cutter head is easy to change. It also can double your feed rate while significantly ... read more...

TigerStop Inc.

TigerStop lineal positioning device TigerStop is a linear positioning device that attaches to existing equipment to automate the positioning of material for processing in the wood, plastic and metal industries. ... read more...

TigerStop is pleased to announce the Precision Rough Mill, the new, flexible work cell that results from combining TigerRip 1000 with TigerSaw 1000, the optimizing cross cutting machine. Small to medium sized ... read more...

TigerSaw is designed for speed, accuracy and affordability. It is the complete solution for your shop with TigerStop quality you can count on. The fastest pushfeed system manufactured in the USA, TigerSaw's ... read more...

Show More

TigerSaw 1000, available now, is a fully automated and integrated cross-cutting solution with a crayon defect marking push feed system. It features a heavy-duty build, rugged construction, 18” saw with a ... read more...

TigerStop's newest product, TigerScan, is the a solution for windows, face frames, cabinet doors, passage doors, furniture parts, you name it. The new TigerScan is an affordable push feed defect optimizing system. ... read more...

TigerStop is a linear positioning device that attaches to existing equipment to automate the positioning of material for processing in the wood, plastic and metal industries. Complete jobs in less time and get ... read more...

TigerStop LLC announces the release of the TigerStop; Heavy Duty2 (HD2), an electronic replacement for manual stops. This automatic stop/material positioner virtually eliminates setup time, greatly increases ... read more...

TigerStop's new product, TigerTurbo, is a TigerStop on steroids, the company says. This super-charged TigerStop is specially designed to push up to 1,000. lbs or move at top speeds up to 60 in. per second. With ... read more...

Kaeser Compressors, Inc.

Kaeser introduces its new Airtower compressor packages. These competitively-priced models combine a rotary screw air compressor, storage tank and dryer in one durable and compact unit. Designed for light ... read more...

Kaeser Modular Membrane Dryer Kaeser Compressors, Inc. announces the Kaeser Modular Membrane Dryer (KMM), a simple reliable way to produce dew points from +40 degrees F to -40 degrees F. these low maintenance ... read more...

Newport Specialty Machinery

Joker 7000 CD Newport Specialty Machinery offers the Joker 7000 CD. Manufactured in Germany, Wema lathes consist of heavy cast iron bases, which are completely rigid and torsion free in construction. A key ... read more...

Wema Conquest CNC The Wema Conquest series of CNC lathes are geared toward the custom and production minded facilities. Machines feature automatic part loading for production turning, laser scanner for part ... read more...

J & P Machines

The Invicta line of equipment now offers the Model TIC-15 Single Spindle Shaper. This machine is versatile in that it can be used in small shops as a primary shaper and also in larger shops as a dedicated shaper ... read more...

Amana Tool Corp.

Amana Tool's insert spiral planer and jointer for shaper machines (part 61292) produces smooth cuts that practically eliminate the need for sanding. This 1 1/4-in. bore spiral planer/jointing cutter features a ... read more...

The Pinske Edge

The Pinske Edge, Inc. offers its Drawer Notcher Machine designed to notch and drill cabinet drawer boxes for undermount hardware. It cuts the recess and drills the holes in the drawer box at the same time. The end ... read more...

The Pinske Edge Model #5210 The Pinske Edge, Inc. announces a new drawer notcher machine, Model #5210, that supports the Blumotion hardware as well as regular undermount hardware. This machine is designed to ... read more...

Charles G.G. Schmidt & Co. Inc.

Charles G.G. Schmidt Arc Master Charles G. G. Schmidt ' Co., Inc. offers the Arc Master fixture, which is designed to produce curved, elliptical or even irregular shaped mouldings on the Williams ' Hussey W-7S ... read more...

Charles G. G. Schmidt ' Co., Inc. is pleased to announce the addition of Destaco Clamps to their product line. Fourteen different styles, designed especially for use by woodworkers, are available. Manufactured ... read more...

Charles G.G. Schmidt Feed Master Pro Charles G. G. Schmidt ' Co., Inc. introduces its latest product, the Feed Master Pro. Now a variable feed rate is available for your Williams ' Hussey. Easy to install, this ... read more...

Show More

Charles G.G. Schmidt moulders Charles G.G. Schmidt ' Co., Inc. stocks and distributes both the M645 Tilting Arbor Multi Moulder and M652R Tilting Arbor Multi Moulder with routing capability. Both of these machine ... read more...

Charles G. G. Schmidt Co., Inc. distributes the Mikron 652 Multi-Moulder with routing capabilities. Straight, curved and elliptical mouldings no problem for this solidly built machine. Based on the original 645 ... read more...

Charles G. G. Schmidt & Co., Inc., distributor of the Mikron M645 Multi-Moulder, is pleased to introduce the second generation of this universal woodworking machine. Now with tilting capabilities to 52 degrees and ... read more...

Charles G. G. Schmidt & Co. offers the M'J automatic Rosette Machine, which uses the company's multi-profile Rosette cutter. Using air and hydraulics, the Rosette Machine regulates feed and dwell when making ... read more...

Silver Machine Inc.

This series of tenoner was equipped with the following outstanding features: High-precison grouser shoes are adopted; regulated feeding speed; set the speed difference; high rotational speed of 7,500 rpm; large ... read more...

Silver Machine Inc. offers heavy duty moulders featured with 2-m long, hard chrome plated table. With a maximum working height of 6 in., this moulder has a variable feed speed of up to 86 ft./min.; 6200 rpm ... read more...

Silver Machine Inc. offers a series of heavy-duty moulders in 6 to 9 in. and 4 to 6 spindles. Features of this series of moulder include a 2 m long chrome plated table; front-mounted digital display of spindle ... read more...

Show More

Silver Machine's heavy duty multiple rip saw, the SMRS-300, features heavy cast iron construction, a robust feed track directly through track links and low friction sideways ensuring long life. It automatically ... read more...

Silver Machine offers a heavy duty straight line rip saw, the SR-660AG, with an exclusively designed lubricator and convenient link chain tracking adjustment. In additon, accurate clink change feed ensures ... read more...

Silver Machine Inc. offers a series of Silver heavy duty 12 in./14 in./16 in. multiple rip saw featuring superior aged cast iron made parts, special material made chain block, three rows of anti-kickback fingers, ... read more...

This series of Silver heavy-duty spindle shaper features spindles with MK5 taper, magnetic switch with overload protection, quick change spindle speeds, choice of spindle size, reversing switch, fences with dust ... read more...

Longitudinal veneer splicing machine Silver Machine Inc.'s SVS-1250 is a longitudinal veneer splicing machine. The edge gluing device with heat curing achieves so glued gaps/lines on jointed work piece. The ... read more...

This double-ended tenoner has a digital reader that monitors the working length from 190mm to 3,000mm. Such a large range of adjustable spans could be used for the large sized plate or table surface processing. ... read more...

Silver Machine Inc. offers a variety of heavy duty moulders equipped from 4 to 9 spindles; with central lubricating system, powered infeed table roller, centralized control panel, convenient spindle adjustment, ... read more...

This Silver Random End Tenoner model works for random flooring tenon profile. This machine could shape maximum 120 pieces flooring per minute with exact quality and flexible working function. This model also could ... read more...

This Silver automatic edgebander has an extension table maximizing the working table size to be 2,000mm x 800mm. The automatic conveyer belt runs at a speed of 7 m/min. The machine performs edge gluing, end ... read more...

This Silver heavy-duty moulder features a sealed safety hood that reduces noise levels and prevents chips from splash and variable feed speed at 6 to 24 m/min. Each spindle is driven by independent motor and there ... read more...

This heavy-duty 9-in. capacity machine has three 10-hp and three 15-hp spindles, and a 5HP feed motor. Feed speeds are variable from 6-26 m/min. The 40mm spindles have a speed of 6200 rpm. Working thickness ranges ... read more...

This Silver series of double surface planer is extremely heavy-duty, suitable for cutting heavy, wide, long and moisturized wood. This machine featuring easy knife replacement for top and bottom cutter head, ... read more...

Silver moulders Silver Machine Inc., an associate of Golden Hill Woodworking Machinery, offers a variety of heavy-duty moulders equipped from four to nine spindles. Features include a central lubricating system, ... read more...

Silver Machines' Slat and Round Rod Machine SG-150/3A offers a flexible number of knife and tool combinations of this new multi-purposes machine ensuring a one-time completion of a slat or round rod. The combined ... read more...

This Silver 40 in. automatic end match shaper is fully automatic in clamping and shaping. The machine features an automatic cycle with dowel drilling for accurate alignment of mitred corners. Two worktables work ... read more...

This Silver Heavy-Duty Frame Saw can saw wood material into multiple pieces and also in various sizes. Other features include the auto oil circuit setting for lubricating the machine during use, variable feeding ... read more...

Silver's SAM-6330AHP is a 13 in. six spindles heavy-duty moulder. It features four outboard bearing, PLC system control for motor and spindle adjustment setting, central lubrication, frequency inverter control, a ... read more...

Silver Machine Inc. offers a new series of auto surface planer that comes with T.C.T. spiral cutter head, digital thickness control and variable feeding speed controlled by frequency drive. The table area is 46" x ... read more...

Silver Machine Inc. offers a new double-end tenoner featuring a jumping moulding head. All spindles on the SMD-4830AP are tiltable. Other features include high precision linear track fir width adjustment; track ... read more...

Three models of SMX3820/25/30 to choose from, with machinery lengths from 190mm to 2,000mm, 190mm to 2,500mm and 190mm to 3,000mm. High-speed milling cutters rotate at 7,500 rpm for a better finish. Includes left ... read more...

This Silver series of double-ended tenoner features a sealed safety hood; continuous high speed conveyer belt; active pressure feed; and precision spindle of good quality alloy steel, heat treatment, and CNC ... read more...

Silver Spiral Cutterhead Planer Sander, SPR series Silver Machine's heavy-duty planer/sander is a combination of planer and sander featuring one cutter and two or three belts with a digital readout on the ... read more...

This Silver SPR Series of spiral cutterhead planer sander is a combination of planer and sander. The first station is a knife planer head; follows with a contact drumhead at the second station, and a platen head ... read more...

This Silver SR series automatic edgebanding machine features premilling; an edge feeding speed of 0.5/16 m/min. (0 to 16 m/min.); edgebanding auto scissors with a maximum of 0.8mm; auto edge cutting in rolls with ... read more...

Silver Machine Inc. offers a new automatic edgebanding machine featuring 3-hp band feeding; 1,750W glue heater; 0.75kw glue feeding; a 3mm maximum band cutting;an end trimming rotation speed of 12,000 rpm; edge ... read more...

Silver Machine Inc. offers a series of automatic edgebanding machines with feeding speeds ranging from 0 to 16 m/min. Other features include a roatation speed of 12,000 rpm; buffing rotation speed of 1,400 rpm, ... read more...

This Silver STAR-6A/B is a 9 in., 6 spindles heavy-duty moulder with a cast iron lathe bed made from one piece of superior aged cast iron. Its features include a 2 m long chrome plated table; digital reader for ... read more...

Silver Machine Inc. offers this Silver brand SYTS series of automatic cut off saw with graphical interface system with touch screen and Automatic Positioning System. The SYTS Series has a maximum cutting thickness ... read more...

Freud America, inc

Automatic Diameter Recovery (ADR) Freud's line of completely new planer heads feature a patent pending innovation, Automatic Diameter Recovery (ADR). ADR allows knives to be maintained at a constant diameter ... read more...

router table and fence combo package Freud's new RTS5000 router table and fence combo package makes it easy to set up a professional router table system. The package includes Freud's SH-5 router table fence, ... read more...

J & G Machinery, Inc.

Whirlwind 216 cutoff saw Whirlwind Inc. offers the Model 216 cutoff saw, the largest saw offered by Whirlwind. Using a series of fence combinations, the 216 can cut 1 by 18 in., 2 by 16 in., 3 by 14 in., 4 by 12 ... read more...

The Invicta line of woodworking equipment offers two models of bandsaws, the SFI-60 and teh SFI-80. Both models are equipped with a cast iron frame, cast iron CNC precision ground table, cast iron wheels, ... read more...

Atlantic Machinery Corp.

Atlantic Machinery offers Paoloni "Master" series of throughfeed moulders featuring a precisely machined, reinforced single block steel frame that is both very strong and vibration free. All the models feature ... read more...

Paoloni Model T-112 Atlantic Machinery Corporation offers the heavy duty Paoloni Model T-112 shaper with a motor up to 7.5 hp, interchangeable spindle and five speeds. The table size is 47" x 27 1/2". The Model ... read more...

Atlantic P 40 Atlantic Machinery Corp. offers the Paoloni P 40 heavy-duty 10-ft. sliding table saw with scoring. It comes with a 9.9-hp 3-phase motor and uses a main saw blade up to 16 inches. Standard ... read more...

Show More

Vitap from Atlantic Atlantic Machinery Corp. carries Vitap's edgebanders equipped with a glue-pot heating system the models BC91-A and BC91-B. Both apply various materials to pieces straight and curved, ... read more...

Tech Mark, Inc.

Tech Mark, Inc. offers the ROJEK line of four and five head spindle moulders. These machines have a working capacity of 9 1/16" x 4". The 40mm spindles have a capacity of 6000 rpm and variable feed speeds of 20 ... read more...

Ten Fingers Corp.

Radial arm shaper and dado from Ten Fingers The Radial Arm Shaper and Dado uses a router mounted on a heavy-duty radial arm that allows you to make Dados up to 45 degrees by aligning the router with a line on the ... read more...

Hurst Engineering

Hurst Engineering offers the SK 1100 knife hinge slot cutter, which cuts slots in doors for self closing knife hinges. A standard 4-in. carbide cutter provides precise radius, and indexing stops position the door ... read more...

Terrco, Inc.

Terrco KS 5000 Terrco offers the K-Star Model KS 5000, complete with two spindles on a 10 in. center, and 24 in. carving length and table for relief carving. read more...

Steel City Tool Works

Steel City is adding a new 13 in. Deluxe Planer (Model 40200) to its line. The features packed into this machine are setting new standards in its class, the company says. The entire head travels on four corner ... read more...

Steel City introduces the 13-in. Deluxe Portable Planer with patented helical cutterhead (model no. 40200H). The patented helical head has 26 indexable HSS inserts, providing superior finish, longer cut time and ... read more...

Steel City introduces its new 6 and 8-in. Deluxe Jointers with granite beds and fences (6-in. model 40640 and 8-in. model 40660). These additions to the Steel City line are machined perfectly flat and will not ... read more...

Eagle Machinery & Supply Inc.

Increase your productivity with the Eagle Batching Planer Feeder, which accumulates consistent lumber groups for improved performance. For uniform planer knife wear, Eagle's unique design sizes material batches to ... read more...

Whatever your application, Eagle transfer chains move material from one place to another with ease. We design our transfer chains to provide optimal flexibility for your operation, with head sections (motors, gear ... read more...

Designed for cutting multiple lengths from large dimension stock, the Eagle Multi-Trim Saw brings precision and flexibility to high volume operations. Durability and accuracy come together in a design originally ... read more...

Show More

Increase your cut yield and throughput with the Eagle Talon, the fully automated optimization cutoff saw. A proven mechanical design combines knurled in-feed rolls with air-loaded, logic-controlled hold down rolls ... read more...

Eagle offers the latest technology for value based optimization. The solutions employ lean manufacturing principles to analyze your process with innovative design and proven engineering. Eagle creates systems and ... read more...

Castle, Inc.

Castle Equalizer The Equalizer is a true hot-melt edgebander from Castle, Inc. It uses an automatically fed, "bottomless" glue pot and conventional hot-melt glue pellets for rock solid bonds every time. The ... read more...

Castle EB2 edgebander Castle, Inc. offers the EB2 hotmelt edgebander, which is designed specifically to solve the majority of panel edgebanding applications for the small shop. The EB2 uses all hotmelt ... read more...

The Castle Equalizer is an entry-level hot melt edgebander that was designed to give small shops true quality edgebanding capability at an affordable price. With a warm up time of 18 minutes, this PLC controlled ... read more...

Show More

The Equalizer from Castle Castle, Inc. levels the playing field between the small and medium-sized shop with The Equalizer. This is a true hotmelt edgebander designed with Siemens controls and a footprint for the ... read more...

Unique Machine & Tool Co., Div. of Kenlin Inc.

Unique 310 Cope machine The Unique Machine ' Tool Model 310 double spindle cope machine is designed to produce top and bottom door rails that are already pre profiled. The two counter-rotating cutter heads ... read more...

Unique Model 336-4 TS Unique Machine ' Tool introduces the Model 336-4 TS. It will shape and sand door edge and raised panel profiles. Two direct drive floating shaper spindles and two floating sander spindles ... read more...

Unique introduces its new Model 3503 Triple End Tenoner (patent pending). The 3503 will produce finished size cabinet door stiles and rails from random length and width material. The compact feed-thru machine was ... read more...

Show More

The Unique Machine & Tool Co. has produced the Model 250 raised panel door which it claims can produce a complete door in under two minutes. The multi-cutter system moves different cutters into place. The Unique ... read more...

Unique Machine ' Tool Co. now makes a CNC shaper suited for making cabinet doors and related custom moldings and valances. Called the Model 2700, it has a spindle that travels along a rigid, cast-iron column and ... read more...

Unique Machine and Tool Co. offers the Model 290 Solid Door System. The system produces one piece doors with square corners. Using a 3 or 4 tool design, a true raised panel can be produced which allows up to two ... read more...

Unique Machine ' Tool Co. offers a double-spindle coping machine that makes end-cuts on cabinet doors. Called the Model 310, it uses counter-rotating cutterheads, which the company says eliminates tear-outs of ... read more...

Model 3250 shaper/sander from Unique Machine Unique Machine ' Tool Company offers the Model 3250 shaper/sander, which is designed for machining with stacked toolsing for multiple profiles. This machine offers ... read more...

Delta Machinery

DELTA Machinery introduced three drill presses. The new drill presses, models 17-959L, 20-950 and 20-959LX, have a larger-than-normal woodworker's table to provide the user with a larger work surface with multiple ... read more...

Progressive Systems, Inc.

Progressive Systems cabinet and furniture machines Progressive Systems, Inc. offers a kitchen cabinet and furniture machine, which is designed for machining and sanding of door edge profiles and raised ... read more...

Progressive Double-end tenoners Progressive Systems, Inc., offers double-end tenoners that feature a variety of options. An incremental feeding system allows for in-line boring, routing and drilling of stock. The ... read more...

Progressive Systems double-end and moulder feeder Progressive Systems offers a double-end machine with close tolerance sizing accuracy and fast setup features including a infeed belt metering system and ... read more...

Show More

Progressive Systems introduces its newP-5 Double End Tenoner, which is designed for high production precision machining and sanding of kitchen cabinet components. Features of this machine are as high-speed spindle ... read more...

Progressive single end and double end tenoner Single end and double end machines provide edge machining and sanding of cabinet parts eliminating any hand sanding. Bar code and touch screen computer part select ... read more...

Progressive Systems Inc., has tenoners that provide profile and part size changes in less than one minute with "run-one" part machining accuracy, the company says. The adjustable side of the machine and the ... read more...

Single end tenoner from Progressive Systems The new Vertical single end tenoner from Progressive Systems, Inc., has production rate end profiling tenoning of up to eight parts in one vertical machining cycle; its ... read more...

Denray Machinery Inc.

Danray lathe chuck shields Danray Products LLC has just released a line of heavy-duty lathe chuck shields that are designed to apply to lathes or other similar machine applications. The 3/16 in. thick ... read more...

Lobo Machinery, Inc.

Lobo four-sided moulder Lobo Machinery offers a four-sided moulder, which features standard feed speeds ranging from 20 to 98 fpm. Faster feed speeds of up to 120 fpm are available. The machine's verticle ... read more...

Lobo CL-51SAP Lathe Lobo's CL-51SAP lathe is suitable for low quantity and multi-style production use, not to use one unit knife for cutting, and saves the cutters cost. It adopts the precision hydraulic copying ... read more...

A complete range of machines, the Lobo EB series represents one of the most complete lines of single sided edgebanders in the industry today. Fully equipped with all the features expected from an automatic ... read more...

Show More

Lobo Machinery offers the Model EB-1, a portable, manual edgebander machine that has an automatic gluing system/glue pot under its applicator. It operates at speeds ranging from 7 to 98 fpm. Two thermo-control ... read more...

SOLID CAST IRON CONSTRUCTION FOR MAXIMUM STABILITY. A WIDE SELECTION OF 4 TO 9 SPINDLES MOULDERS WITH ANY COMBINATION OF HEADS POSITION, PUSH OR THOUGH FEED, VARIABLE FEED SPEED, DIGITAL CONTROL OF CUTTER ... read more...

Lobo Raised Panel Shaper Lobo Machinery's raised panel shaper is designed to make all parts for raised panel doors at one machine. Menu or auto mode, 3-position 6-inch stackable spindle for panel, rail and cope. ... read more...

Lobo Machinery Corp. offers a range of the high-quality tenoners. Features include: single- or double-sided, sliding table, carriage or through-feed two to 10 heads, combination of saw, coping, moulding, sanding. read more...

Lobo moulders Lobo Machinery offers a wide selection of four to nine spindle moulders with any combination of heads position, push or though feed, variable feed speed, digital control of cutter position, high ... read more...

Lobo PL-24 Lobo's PL-24 planer has two cutter heads, one top, one bottom, and provides a powerful planning capacity. A step-less variable speed changer is available for smooth adjustment of feeding speed, which ... read more...

Raised panel shape from Lobo Lobo offers a planer designed to make all parts for raised panel doors on one machine. The machine is equipped with menu or auto modes, three positions and 6-in. stackable spindles ... read more...

SET-86DET by Lobo Machinery Lobo Machinery offers its model SET-86DET, an automatic double-end tenoner for cutting and spindle-moulding operations. Features include automated control of cutting width and ... read more...

Lobo's Sand and Shape Machine was specially designed for the mass shaping and sanding production of raise panel doors and profile edges. It has variable speeds and through feed; a 5-in. wide rubber pad conveyor ... read more...

Lobo SM-523C moulder Lobo Power Tools, Inc. offers the SM-523C moulder, which features variable speeds and five spindles. The standard SM-523C is equipped with through feed, 40 mm spindle diameter and mechanical ... read more...

Lobo Moulder Solid cast iron construction for maximum stability. Lobo offers a wide selection of 4 to 9 spindle moulders with any combination of head position, push or through feed, variable feed speed, digital ... read more...

Lobo Machinery Corp. offers a range of the high-quality tennoners. Models are available with single or double side, sliding table, carriage or through feed, two to 10 heads, combination of saw, coping, moulding ... read more...

Lobo moulders Lobo offers three and four side moulders. Lobo moulders are constructed with cast iron, variable speeds and three-stage pressure rollers. Three to eight spindles are available with Lobo moulders. read more...

Voorwood Co.

Voorwood introduces the A515-CNC feed through arch machine, capable of shaping and sanding arch profiles on cabinet door components without precontouring. Equipped with a design center' program, the 515-CNC ... read more...

The Voorwood Model M25 is designed to rapidly make mortise and tenon cuts at 0, 45 and 90 degrees. A primary application for this machine is for mitered door frames. Parts can be quickly transferred from left to ... read more...

HSU PEN Machinery

HSU PEN Machinery HP-CNC200 CNC tenon machine HSU PEN Machinery introduces the HP-CNC200 CNC tenon machine. The fast and accurate machine inputs dimensions, angles of inclination and arc dimension of the ... read more...

Mikron Woodworking Machinery

Mikron M652R 203:04-2003:100199175 When the engineers designed the Mikron M652R, they kept all the same powerful features of the M645. Then they added routering capabilities. That means, with just a few simple ... read more...

Mikron multi-moulders Mikron designed M645 Multi-Moulder and the M652R Multi-Moulder with Router System with the operators in mind. It used to take up to two or three operators plus up to two or three different ... read more...

Sorbilite Inc.

Sorbilite offers a moulding press, which the company says is 10 to 15 times faster than machining. Basic requirements fulfilled by the Sorbilite system include specific pressure up to 1,000 psi and low cost metal ... read more...

Lignomat USA Ltd.

Lignomat USA introduces the Ligno-Scanner, the right meter for cabinetmakers, hardwood floor installers and anyone measuring lumber up to in. thick. The Ligno-Scanner S is a pinless wood moisture meter good ... read more...

TNT Virutex Corp.

TNT/Virutex Lipping Planer The AP-98 is for flush planing of edging material of hardwood, soft wood, plastic laminates, and thick PVC tapes. Ideal for small shops which apply thick edges without an automatic ... read more...

TNT/Virutex Curve Planer The CE96H is a planer for curves and contours. Cutting width: 3-5/32" or 80mm; min. concave radius: 17-11/16" or 450mm; minimum convex radius: 16-3/4" or 400mm; cutting depth: 0-1/8" or ... read more...

Williams & Hussey Machine Co., Inc.

Williams & Hussey Moulder/Planer Williams & Hussey Machine Co. manufacturers a portable combination moulder/planer. The moulder is sold primarily to small contractors, millwork shops, lumber yards, cabinet shops, ... read more...

The W H Model 206 with vari-feed and multipass combination provides the operator much more versatility while increasing capacity. In addition, the new guide system makes the machine more user friendly for our ... read more...

Williams & Hussey Machine Co., Inc. introduces its Model 209 Molder. It has a new lighter, higher, compact base allowing for increased productivity and mobility. The Model 209 includes a new power feed motor with ... read more...

Show More

Williams & Hussey Machine Company Inc. will introduce at the IWF Atlanta show a new Multi-Pass with Vari-Feed System W&H is making a design change to its molding machine. The Multi-Pass allows you to take any ... read more...

Ritter Mfg., Inc.

This four-spindle shape and sand machine provides for two-spindle shaping and two-spindle sanding for mid-range production of arched cabinet door panels, door and drawer front edges. read more...

Ritter Mfg. the R10, a single spindle shaper. It is a basic heavy-duty spindle shaper for standard cabinet door applications. The R10 is available with up to 7.5 hp spindle motor. read more...

The R11 from Ritter Mfg. is a single spindle production shaper. It is designed for heavy-duty millwork and cabinet door prodcution. It is available up to 15 hp. read more...

Show More

Ritter's R12QC is a quick-change spindle HSK F63 shaper. It provides for quick set-up changes with the use of HSK F63 quick-change spindles, digital spindle height and fence setting displays. read more...

Ritter Mfg.'s R9H60 beaded frame notcher provides for fast and accurate notching of beaded cabinet face frames and doors. read more...

Scarlett Machinery, Inc.

Scarlett Machinery, Inc. offers the Cantek C610AS double surface planer, which is equipped with 25- and 20-hp top and bottom belt driven cutterheads with carbide insert helical design. The planer also features ... read more...

Hasko Inc.

Hasko, Inc. offers a five-head true matcher (with directly opposed side spindles) and features hydraulic variable speed ranges of 250 to 575 fpm and revolutionary Quick-Clear jam clearing. It is well-suited for ... read more...

Model HSLF Lateral-To-Lineal Feed System Hasko, Inc. recently introduced its high speed Model HSLF Lateral-To-Lineal Feed System for continuous automatic feeding of random length strips to matchers or moulders. ... read more...

Giben America, Inc.

Giben America now distributes edgebanders from our new partner, Elwood, to the North American woodworking industry. The Saet series of edgebanders are made of a heavy duty steel construction with top hinged safety ... read more...

Schelling America, Inc.

Schelling America Evolution Saw Carriage The Evolution Saw Carriage from Schelling delivers forward cutting speeds of up to 100 mpm (328 fpm), return speeds of 150 mpm (492 fpm) and book cutting heights of 210mm ... read more...

Newman Machine Co.

The Newman EPR-600 Double Planer is an economical, quality planer designed to be the alternative to typical "entry level" planers. The EPR-600 design is based on Newman's high speed double roughing planers but is ... read more...

EPR-SS planer from Newman Machine Newman Machine Co., Inc. offers the EPR-SS Series (short stock series) of double roughing planers, which are designed to surface rough lumber in both short and long ... read more...

LB-855 Glulam Planer Newman*Whitney offers the LB-855 Glulam Planer. It provides customers with the ability to surface wide materials top and bottom up to 55-in. width and 8-in. height. It is an excellent choice ... read more...

LuxScan Technologies, Inc.

LuxScan CombiScan C200/C400/C600 LuxScan offers its new CombiScan C200/C400/C600, a high-speed, high-resolution multi-sensor scanner, providing high level defect detection and/or color inspection for up to three ... read more...

Wood-Mizer

Wood-Mizer E430 Board Edger Wood-Mizer Industrial Products is marketing the E430 Board Edger designed to provide a edger at a price point smaller operations can justify while still providing the features and ... read more...

Wood-Mizer five-spindle moulding machine A Wood-Mizer five-spindle moulding machine is one of the easiest and more affordable ways to add value to your lumber. It can produce flooring, siding, S4S or practically ... read more...

Wood-Mizer moulder Wood-Mizer offers a five-spindle moulder that can produce up to 80 linear feet per minute making S4S, tongue and groove siding, flooring and much more, in just about any trim profile. The ... read more...

Show More

Moulders from Wood-Mizer Wood-Mizer Products, Inc. offers a two different 5-head moulders, which can handle material 8 in. and 6 in. wide. Both moulders feature 7.5-hp side and bottom motors, 10-hp top ... read more...

Rockler Woodworking and Hardware

Rockler Woodworking and Hardware has introduced new Lathe Tool Rests, featuring significant improvements in ergonomics and performance over rests that are typically included with lathes from the factory. The main ... read more...

Offset Router Table The offset plate was designed to allow for the attachment and travel of the new Incra Universal Precision Positioning jig but will accommodate most precision jig systems. The inventive design ... read more...

JET Equipment & Tools

The new JET family of 16, 18 and 20-in. woodworking band saws feature an exclusive triangular column design for superior strength and rigidity that reduces frame twist by 65 percent, plus a new three position ... read more...

The new line of JET Bandsaws in 16-, 18- and 20-in. sizes feature triangular designed frames for superior column rigidity. Optimal stability is achieved through TSC (Triangular Stability Control). ... read more...

Taghleef Industries Inc.

For a Spindle Moulder that offers the highest quality, precision and stabilityeven when machining heavy pieces, Adwood Corporation recommends the 5-speed Casolin F90 K. The F90 K's sturdy construction makes it ... read more...

Tapes Tools a division of Adwood Corp, has added the original Adamik SPEED Edgebander to its inventory of high-quality, affordable machinery. This hand-held edgebander is ideal for a wide range of applications. ... read more...

Casolin F45 Spindle Moulder from Adwood Available exclusively from Adwood Corporation, the Casolin F45 Spindle Moulder with tilting shaft has been designed with special ergonomic characteristics that make it ... read more...

Show More

Adwood Corporation/Cehisa EP-9LCD Rapid Series Edgebander Adwood Corporation has introduced the new Cehisa EP-9LCD in the Rapid Series line. The Rapid Series features end trim, top and bottom trim, radius scrape ... read more...

Adwood EP-9 'Rapid Series' Edgebander Adwood Corporation has introduced the new Cehisa EP-9 in the Rapid Series line. The EP-9 features end trim, top and bottom trim, radius scrape and buffing. It also carries as ... read more...

Adwood Corporation introduces its PRO Series edgebanders with Programmable Logic Control from Cehisa. PRO is best suited for automatic edgebanding application with roll or strip edgebanding material. Standard ... read more...

The features that make an edgebander state-of-the-art in the 21st century are available now on Adwood Corp.'s new SYSTEM Series edgebanders. All machine functions are controlled by a PLC microprocessor whose ... read more...

Falcon Engineering USA, Inc.

The MOR 300 senses the board activating the pinch roller in function. It utilizes a laser to measure thickness. As the board moves forward the MOR 300 applies a measured amount of pressure detecting any weakness; ... read more...

Therm O Web

Therm O Web offers the Hebrock glue pot edgebander line, which includes contour and straight edgebanders. Shown here is the AKV-3005DK, which allows for materials up to 12mm to be applied and trimmed ... read more...

Therm O Web edgebander Therm O Web offers the AKV-83GP edgebander, produced by Hebrock in Germany. The AKV-83GP produces up to 1.4mm or approximately 1/8" thick banding material on substrates that size up to 2.5" ... read more...

K 75G Edgebander from Therm O Web The new K 75G edgebander applies and cleanly trims materials 3mm/1/8" thick. The dual heat controllers allow for quick glue pot melting and comes standard with features like: 7 ... read more...

Show More

For over 25 years, Therm O Web has set the industry standard for quality and innovation. The company continues that tradition with its new line of innovative hot air and glue pot contour edgebanders and trimmers. read more...

The RX 75 glue pot edgebander from Therm O Web is a compact, fully automatic, single-phase unit with high frequency top and bottom trim motors and six blade trim heads with insert tooling for a straight or radius ... read more...

Therm O Web K 70 SCD Therm O Web offers the a new 36-unit edgebander line, which provides small to large production shops with a choice of either hot air or gluepot offerings for both straight and ... read more...

Pruitt Machinery, Inc.

Distributor Pruitt Machinery bills the Iida moulder as the incorporation of the latest technology into some of the heaviest moulder construction in the world. From small four-head machines to 15" 12-head machines, ... read more...

Friulmac

The Quadramat line from Friulmac is designed to process a wide range of operations, for both solid wood and panel products. All versions of the Quadramat are built based on a modular concept to suit all your needs ... read more...

Paul Saws & Systems, Div. of Koch Ltd.

Optimizing Ripsaw Infeeds Paul Saws ' Systems offers 3 different types of optimizing ripsaw infeeds. These infeeds improve the overall performance of the ripsawing system to which they are applied. Paul ... read more...

Series 11 Optimizing Cross-Cut Saws Series 11 saws remove defects, cut pre-programmed lengths from boards 1" to 7" in width, offer automatic out feed sorting and stacking, and are equipped with the latest CNC ... read more...

Quick Machinery Company

Biesse Excel Series New to the Biesse line, the Biesse Excel Series is a numerical control milling machine sized to work solid wood and its derivatives, composite materials, plastics and nonmetal alloys. ... read more...

Grizzly Industrial, Inc.

Grizzly Industrial's G0452 6" x 46" Moblie Jointer features a built-in mobile base and cabinet-style stand, as well as a pedestal mounted ON/OFF switch for easy access. The rack and pinion fence on the G0452 make ... read more...

Grizzly Industrial introduces Model G0453Z, a 15-in. planer with spiral cutterhead. The machine features a 3-hp, 220-volt, single-phase motor. The spiral cutterhead has indexable carbide inserts. read more...

Most planer/moulders are just too heavy to be called portable. That's why we are pleased to introduce our new portable G0477 Planer/Moulder. A powerful universal motor and high speed cutterhead will make quick and ... read more...

Show More

Grizzly Industrial introduces the Model G0513X2B 17-in. bandsaw with motor brake. The G0513X2B has a 2-hp, 220-volt, single-phase motor. A built-in magnetic motor brake stops blade in less than 3 seconds for added ... read more...

Grizzly Industrial introduces the Model G0531B, a 21-in. heavy-duty band saw with magnetic brake. It has a 5-hp single-phase 220-volt motor. The built-in magnetic motor brake stops the blade in less than 3 seconds ... read more...

Grizzly Industrial offers the new Model G0544 20-in. Spiral Cutterhead Planer . Additional features include a 5-hp motor, a precision ground cast iron table for flat planing results, a variable speed feed rate ... read more...

Grizzly Industrial introduces the Model G0555X 14 in. Extreme-Series Bandsaw. The bandsaw has a 1 1/2-hp, 110V/229V motor and has a heavy-duty steel cabinet stand with two shelves. The G0555X has computer-balanced ... read more...

Grizzly Industrial introduces the G0603X Planer. The G0603X has a 15 hp, 220 volt/440 volt, three-phase motor and an electronically controlled table elevation with a bright LED display. A digital control panel ... read more...

Grizzly Industrial introduces the Model G0608X Extreme Series tilting spindle shaper. The precision dial scale shows the exact angle of spindle tilt. The G0608X features a 7 1/2 ' 2 hp, 220-/440-volt, three-phase ... read more...

Grizzly Industrial introduces the Model G0624 10 in. cast iron benchtop lathe. The G0624 has a 1/2-hp, 110V, single-phase motor, and it can turn workpieces up to 10" in. wide and 15 in. long (up to 38 in. between ... read more...

Grizzly Industrial introduces the Model G0660X combination jointer/planer. The G0660X feaures a 4.2 hp, 220-volt, single-phase motor. A Leitz cutterhead features three pre-adjusted and reversible 161/8 x 1/2 x ... read more...

Grizzly's Model G1037Z 13-in. planer/moulder offers the added convenience of adjustable moulding guides for precise workpiece alignment and a repositioned motor for easier blade changes. Additional features ... read more...

The new Model G0448 Mortising Machine from Grizzly Industrial can make a square hole at any angle. Simple adjustments allow the head to tilt from 45 degrees left to 45 degrees right, while the fence swings 30 ... read more...

Grizzly Model G9933 Three Spindle Shaper Grizzly's Model G9933 Three Spindle Shaper is especially useful for those with limited shop space, according to the company. This time-saving machine will allow you to cut ... read more...

Grizzly Industrial offers the Model G9977 Wood Mill, the first milling machine that functions as a traditional metalworking mill, yet crosses over as a wood milling machine. It features a 9-speed spindle ranging ... read more...

Mereen-Johnson Machine Co.

Mereen-Johnson 600 and 2000 Series tenoners Mereen-Johnson Machine Company manufactures a complete line of single and double end tenoners, from single station precision end trim machines which can be integrated ... read more...

Mereen-Johnson 600 Series Mereen-Johnson offers the 600 Series double-end tenoners. The 600 Series features automatic in-feed and/or out-feed systems, and is suited for integration with moulders, transferring ... read more...

Mereen-Johnson 640 Single End Tenoner The Mereen-Johnson 640 Single End Tenoner is beneficial for short or long runs; JIT of parts; and batch size to orders. It features a multi-station feed through shaper with ... read more...

Show More

Linares has produced high value moulders, grinders, parting saws, fingerjoints, planer/matchers and specialty solid wood processing equipment since 1953. The Linares line is manufactured in the company's factories ... read more...

Mereen-Johnson 2000 Series Mereen-Johnson offers its Model 2000 series double end tenoner. Features include 4, 8, 10 or 12-ft. traverse capacity, 7-in. throat clearance, vibration damping cast-iron ... read more...

The Model 524-DC/SR can be equipped with up to four fully independent shifting saw blades maximizing production flexibility, improving utilization efficiencies from raw materials, and drastically reducing set-up ... read more...

The Mereen-Johnson Model 900-M Versa-Moulder is designed for the journeyman custom woodworker for the production of straight and curved specialty millwork. A 10 HP universal motor, with up to 9 tool space, is ... read more...

Mereen-Johnson Machine Company's Rip Navigator Optimizing Scout System for the Gang Rip Saw provides big shop production and features in a small footprint and is affordably priced. Rip Navigator is equipped with a ... read more...

Industry leading technology is integrated with robust weldment and cast iron construction to provide the accuracy and quality of finish you need, even at high production speeds. Mereen-Johnson Machine Company ... read more...

Industry leading technology is integrated with robust weldment and cast iron construction to provide the accuracy and quality of finish you need, even at high production speeds. Mereen-Johnson Machine Company ... read more...

Woodstream Machinery offers a new choice for value in high speed jointed and non-jointed moulder applications. A full line of moulders, grinders, and parting saws feature robust cast iron construction, industry ... read more...

Woodstream Machinery offers a new choice for value in high speed jointed and non-jointed moulder applications. A full line of moulders, grinders, and parting saws feature robust cast iron construction, industry ... read more...

Vista Machines, Inc.

Vista up-cutting miter saws are used in industries from bird houses to store fronts, and just about everything in between. When it comes to cutting angles these saws are the safest, and most accurate on the ... read more...

SK-USA

SK KP series moulders carry all the features carried in the heavy weight class at a much more affordable price. SK has designed the machine with more upper feed rolls and more powered bed rolls contributing to an ... read more...

Hoffmann Machinery

Hoffmann Machine Company, Inc. offers the BH 556 lipping planer, which is designed for flush planing of solid hardwood and softwood edges on panels, bookshelves and table tops. The machine offers height ... read more...

Hoffman Lipping Planer The Hoffman Machine BHM-56 Lipping Planer is designed for flush planing a variety of edgebanding materials. The heavy duty machine features 2" wide solid carbide knives and a 1hp commercial ... read more...

Hoffmann Machine Company offers the MORSO NFL manual notching machines. These guillotine-style machines are used for the fast and accurate production of beaded face-frames. The machines are designed to notch the ... read more...

Show More

The MORSO NXLEH, distributed by Hoffmann Machine Company, is a large capacity notching machine for beaded face-frames. The machine is designed to notch the stiles and cope the rails without time-consuming ... read more...

Pistorius Machine Co., Inc.

The second generation of automated stop uses 12-in. color screen to provide a user-friendly interface between the saw operator and the new Position Management System. The software runs on an integrated PC allowing ... read more...

The Pistorius HM-1 single station haunching/notching machine can be fitted with material clamps, single and multiple stops and work fixtures that are available for nearly any application. Cutter depth is ... read more...

The second generation of automated stop uses 12 color screen to provide a user-friendly interface between the saw operator and the new Position Management System. The software runs on an integrated PC allowing ... read more...

Show More

Pistorius special purpose machines Pistorius offers a wide variety of standard and special purpose haunching, notching and end profiling machines. Typical applications include beaded face frames, mitered tongue ... read more...

James L. Taylor Mfg.

JLT Clamps, a division of James L. Taylor Mfg., announces another new product for the mitre cabinet door manufacturer. Now available is a dual station mitre door clamping and squaring machine. This pneumatic ... read more...

Wilke Machinery Co.

The BRIDGEWOOD CM-555 five-spindle moulder incorporates throughfeed design and has a chainless feed system for superior performance. This model features full coverage sound cover/safety enclosure and has a central ... read more...

Bridgewood through-feed moulder from Wilke Wilke Machinery now offers the Bridgewood CM-757, which it bills as a full-featured and moderately priced through-feed moulder. The CM-757 can handle work up to 8" in ... read more...

BRIDGEWOOD; BWM-314B 3 Side Planer/Moulder The BWM-314B is perfect for making flooring, stair treads, siding and more. The top head is 14" wide with 4-knife corrugated back pockets and sectional knife locking ... read more...

Show More

Bridgewood CM-555 The Bridgewood CM-555 five-spindle moulder from Wilke Machinery incorporates through feed design and has a chainless feed system for superior performance. This model features full coverage ... read more...

The BRIDGEWOOD PBS-440 and PBS-540 Band Saws The BRIDGEWOOD PBS-440 and PBS-540 Band Saws are woodcutting band saws made in Italy to exacting specifications. The close tolerances assure a super smooth-running ... read more...

Holz-Her US

SPRINT edgebanders from Holz-Her Holz-Her offers new edgebander models as part of its SPRINT product range. The SPRINT 1305 and SPRINT 1310 offers high flexibility in edgebanding at the entry level, ... read more...

HOLZ-HER US, Inc. introduces the new Arcus Series of edgebanders. The Arcus series continues the long standing tradition of quality edgebanders developed by Holz-Her. This new series of edgebanders is built using ... read more...

Holz-Her Sprint 1305/1310 Holz-Her U.S. Inc. offers the Sprint 1305 and Sprint 1310, which offer high flexibility in edgebanding at the entry level. The innovative machines feature a reduced footprint and ... read more...

Show More

Holz-Her's Sprint 1321 edgebander Holz-Her offers the Sprint 1321 edgebander, featuring premilling (with two plunge controlled cutter units), a corner rounding unit and the Holz-Her PLC (Programmable Logic ... read more...

SPRINT 1417 Edgebander Holz-Her offers the Sprint 1417 Edgebander, the only edgebander in its class featuring premilling (with two plunge controlled cutter units), a corner rounding unit and the Holz-Her PLC ... read more...

HOLZ-HER offers a complete range of CNC edgebanders designed and built for the small and medium shop. These machines feature servo-controlled programmable adjustments for working units, which allow easy ... read more...

Holz-Her's "Triathalon 240V PVC" edgebander can machine edges of solid wood up to 13 mm and an edge height of 51 mm according to the company. The machine is equipped with a premilling unit for a tear-free edge at ... read more...

Triathlon from Holz-Her The Triathlon edgebander from Holz-Her allows one to set-up working units, create, store and recall complete edge processing programs, the company says. The Holz-Her PLC is the window into ... read more...

HOLZ-HER introduces the new UNO 1304 with pre-milling. The 1304 is a small powerful and precise Edgebander that includes a compact pre-milling station. The 1304 meets the needs of customers that have low ... read more...

Veneer Systems Inc.

Veneer Systems Inc. offers the Langzauner veneer saw, which is designed for cutting and trimming straight edges in veneer. The saw can also be used for cutting wood panels, lumber and plastic. The saw features ... read more...

Veneer Systems Veneer Splicer The Veneer Systems Furniertechnic LZM thin veneer longitudinal splicer is for custom splicing, architectural millwork and membrane pressing. It produces a solid, invisible splice ... read more...

Leadermac America

The Leadermac Hypermac Moulder comes in a range of working widths of 9, 12 or 13 in. with 6, 8, or 10 in. thickness capacity. It can be configured with two to 12 heads, depending on your application. Leadermac's ... read more...

The LMC Super Thundermac is a high-speed planer-moulder with speeds to 800 or 1,000 fpm. It has a 6" x 9" or 12" capacity and is available with one to 10 heads. The 100-head machine, pictured here, weighs 123,000 ... read more...

The new Leadermac LMC-101 HD Multiple Panel Rip Saw is designed for MDF and lumber for lamination. It is available in 51 and 63 in. wide capacity machines. The 75-hp main saw drive makes this machine ideal for ... read more...

Show More

Each control system option will add value to your moulder operation with reduced pattern changeover times, minimizing the possibility of setup errors. System includes: PLC with touch screen and memory; ability to ... read more...

Kimwood Corp.

Kimwood's history of successful installations has made the Ferrari Resaw the standard from which many others are judged, the company says. The Ferrari Resaw is capable of cutting with one or both saws at speeds up ... read more...

DPI-Advanced Finishing Technologies

GT 2200 The Cattelan automatic double-end tenoner utilizes three 6,000 rpm (up to 7.5 hp) motors on each side mounted on a heavy duty frame. Workpieces (6-86") are guided by low maintenance feed chain from a ... read more...

CTD Machines, Inc.

Double-end Trim Cut-Off Saw by CTD Machines CTD Machines, Inc. introduces our New DM200R 12-in. Double End Trim Cut-Off Saw, with optional lineal powerfeed for length. The table powerfeed moves the right sawhead ... read more...

Richard T. Byrnes Co., Inc.

Bacci TSD-E/13 from Byrnes Richard T. Byrnes Co., Inc. carries Bacci's model TSD-E/13, a double-end, rounding-off tenoning machine. It makes two tenons '#151; one at each end of a piece '#151; simultaneously and ... read more...

Felder USA

The AD6-31 from Felder is for surface planing and jointing. It features: 45 degree to 90 degrees, sizing cuts with sliding tables; shaping 45-90 degrees, mortising, tenoning and sanding; slot mortising and ... read more...

Panel Processing

The Bi-Matic Dynamic 4.5 edgebander from Akhurst is capable of applying PVC and coil tape up to 3mm, laminate and solid wood edges up to 5mm thickness. The machine comes standard with Line Control microprocessor, ... read more...

The Cantek MRS-340M is designed to increase your yield in ripping operations. Models are equipped to shift one or two blades. A user friendly touch screen control allows the operator to store up to 10 programs ... read more...

Leadermac Compact The Compact series from Leadermac is available with four to nine heads. Heavy-duty one-piece machine frame is specially heat treated for maximum rigidity. Various spindle sizes are available to ... read more...

Show More

Leadermac compact moulders Akhurst Machinery Limited offers Leadermac moulders. The moulders in the compact series are available with four to nine heads. The heavy-duty one piece machine frame is specially heat ... read more...

Leadermac moulders from Akhurst Leadermac continues its success of installation of moulders in North America. The Leadermac factory is producing in excess of 100 moulders per month. Akhurst Machinery will be ... read more...

The Leadermac Platinum heavy-duty moulder is available with 2 to 9 heads with 6, 8 or 10 in. thickness capacity by 9, 10.2 and 12 in. widths. It has high-speed 7,200 rpm spindles for faster feeding capacity and ... read more...

The Leadermac Speedmac LMC-623J jointed moulder, from Akhurst Machinery, has optional straight or cartridge profile jointers and feed speeds up to 394 fpm. The machine has a cast iron main frame and all tables, ... read more...

STAR

STAR "V" MACHINERY LTD. introduces their new universal V-Groover model SCG Unistar. This truly universal V-Groover combines a linear and cross groover in one space saving machine. Available with a 8 ft.(SCG-96) or ... read more...

Anderson America Corp.

Anderson America offers the IIDA MC 251 six- spindle moulder, which features 10 in. wide capacity, independent feed roller motors, idle rollers, a chromed hard bed and fences. read more...

MH 224 moulder The MH 224 high-speed (up to 200 feet per minute) moulding machine from Anderson America Corp. cuts so fine it virtually eliminates sanding. The work goes from the machine to the finish room, with ... read more...

Millennium MC 251 from Anderson America The Millennium MC251 six-spindle moulder (approximately 10,500 lbs.) from Anderson America features a monocoque cast iron base chassis. The work goes from machine to ... read more...

Sunhill Machinery

Sunhill 423S 4-side, 4-spindle moulder The Sunhill 423S 4-side 4-spindle moulder is one of the most trusted and proven woodworking moulders in the industry. Sunhill Machinery is dedicated to excellence and the ... read more...

Sunhill Machinery, Inc. carries the Champ Fond MD-180, a four-side moulder made of solid cast-iron. It has a capacity of 7" X 6" (width by thickness). It operates with five individually powered infeed rollers and ... read more...

LMC-423S SmartMac Sunhill Machinery offers the LMC-423S SmartMac 4-sided, 4 spindle moulder, which features a sound and safety enclosure, hard chromed table and fence surfaces and a 6 ft. long infeed bed. The ... read more...

Show More

Sunhill LMC-523C Sunhill Machinery offers a full line of moulders from Leadermac. Leader-mac moulders range from four to nine spindles, with a capacity of up to 20 in. in width. The most popular model, the ... read more...

The Sunhill LMC-623C features a 6-spindle through feed, hardened chrome surface for table and fence, centralized lubrication, one piece heat-treated cast-iron body and a 6.5" infeed table. All Sunhill moulders ... read more...

Sunhill moulders Sunhill Machinery?s moulders are user friendly. Each head has a digital counter for both longitudinal and axial movement for quick set-up and repeatability. It is a throughfeed moulder using a ... read more...

Sunhill Planer/Sander Sunhill Machinery offers the Planer/Sander Combination SDS-900 Series. The first station is a helical knife planer head, followed by a contact drum head at the second station and a platen ... read more...

Porter-Cable Corp.

The new Omnijig Joinery System's dovetail jigs can precisely cut joints for drawers or chests, and cut mortise and tenons for furniture construction. The easy-to-use systems utilize patent-pending features such as ... read more...

Ogden Group

The Orbit Frame Saw, sold by Ogden Enterprises, cuts veneer slats from solid wood blocks with minimal waste from saw kerf. The saw uses multiple, thin blades, as thin as .036 in. thick, to produce an ideal surface ... read more...

The ReMax is a heavy-duty, horizontal resaw that is being used in a wide range of applications including flooring, windows, doors, furniture, musical instruments and many other areas requiring veneer products and ... read more...

The Rotoplane planer's patented approach provides an ideal method for planing your wood products. Using a single rotary disk with knife inserts mounted around the circumference, this system produces a consistent ... read more...

Colonial Saw Co.

Cantex Colonial Saw Company, Inc. offers the Cantex lipping cutter. It features a 45-degree motor and cutter working in harmony to produce a shearing action. The chip cutting process is from the outer edge and is ... read more...

Vecoplan

ReTech RG24/20 U Ramfeed by Vecoplan features a 24- by 32-in. hopper opening, a 20 HP drive motor and a ramfeed system, the RG24 U rotary grinder from Vecoplan, is designed especially for size reduction of wood ... read more...

The VPM 250 Pellet Mill from Vecoplan Midwest is designed specifically for small to medium commercial scale pellet producers. It is ideal for manufactures with relatively small distribution areas, factories and ... read more...

Solid Wood Systems, Inc.

Solid Wood Systems, Inc., offers the Balestrini Nova 3 double round end tenoner. The machine can perform oval tenons or round dowels on both ends of a workpiece at once, the company says. Tenons can be cut from 0 ... read more...

The Lynx/MD is a machine that has been specifically designed and configured to produce components for the kitchen cabinet door industry for both high volume runs and low volume runs in custom kitchens having ... read more...

OMGA, Inc.

The heaviest duty model of all of OMGA's precision mitre chop saws, the T 50 350 features a solid cast iron base and head construction. The rotating table rides on roller bearings for maximum smoothness and ... read more...

Cantek, LLC

Cantek America is pleased to introduce the EM-10 Automatic End Matcher. It is typically used for tongue and groove with or without Vs on flooring and panel products. The EM-10 is a continuous through-feed system ... read more...

Heavy-Duty PR Planer Sander Series The Heavy-Duty PR Planer Sander Series of machines from CANTEK are available in working widths from 24 to 51 in. Various head configurations are available from two to four ... read more...

CANTEK Model PS515 The PS515 is a heavy duty production wood shaper with overhead control for automatically adjusting the spindle height with 10 available presets by PLC. Power rise and fall of spindle with ... read more...

Show More

The new MRS340 ripsaw from Cantek offers a hydraulic quick-locking saw arbor for fast changeover to ripping widths. Simply turn the dial to expand the arbor and lock the blades in place; it's that easy. A ... read more...

The Cantek PR1100 NDA Heavy-Duty Knife Planer Sander has three heads and is 43 in. wide. The first head is a 25-hp spiral cutterhead with six rows of carbide inserts (280), the seconnd head has a 25-hp rubber ... read more...

PRNDA Planer Sander Series The PRNDA Planer Sander Series from Cantek America come in various working widths from 24 to 51 in. It comes standard with a chevron spiral insert-knife cutterhead, and is available ... read more...

Doucet Machineries Inc.

The DOUCET / IOMUS Swingsaw features "Crosscutting in Motion Technology" that cuts boards while in-motion, enhancing potential for automating wood processing plants. The Swingsaw is equipped with a twin blade ... read more...

Doucet Machineries introduced two new flooring end-matchers, including the Super Strip-Flooring End-Matcher which is suitable for production of 35 to 50,000 square feet of random length strip flooring per shift, ... read more...

Accu-Systems

The ACCU-SYSTEMS CXT machine series is designed to produce four tenons with each cycle. Two parts are machined at once with production rates in excess of 25 parts per minute. Round tenons, square tenons and ... read more...

The MMTJ is a single-sided machine for doing mitre, mortise, and tenon work. The table top is V shaped to allow machining of two parts at one time. All referencing is done off of one edge for accurate joints. The ... read more...

The MTH machine series is designed primarily for beaded face frames and french mitred cabinet doors. The machines have separate spindles to haunch, mortise and tenon. Two zones are set up for rails and two zones ... read more...

Warsaw Machinery Company, Inc

The new MBD Model 4400 Robotic Bandsawing System replaces manual manipulation of material through the bandsaw blade with robotic manipulation. This new manufacturing system integrates the cutting productivity of a ... read more...

Martin Woodworking Machines

Quick-change system for Martin shapers All Martin shapers now come with the popular "Dornfix" quick-change system for the arbor, reducing tool changes to seconds. The tilting version of the shaper, the T26 also ... read more...

The MARTIN T 27 shaper is equipped with the original MARTIN "Dornfix" quick-change system for the arbor, reducing tool changes to seconds. The tilting version of the shaper, the T27 Flex also offers a unique ... read more...

The MARTIN T45 Contour is a unique solution to obtain wide profiles. With up to an inch depth of cut, the T45 Contour can machine products such as church pew seats, decorative billiard table aprons and complex ... read more...

Show More

Besides exceptional cutting quality, the MARTIN T 45 planer offers a computer with memory and automatic adjustment of 99 dimensions in the basic execution. The max. cutting height has been enhanced to 12 in. This ... read more...

The MARTIN T54 jointer assures the operator of straight, flat workpieces with its large precision tables and rapid change TERSA cutterhead. With the electrically adjustable infeed table depth of cut is quick and ... read more...

The MARTIN T12 shaper is the woodworker's entry into MARTIN's world of shaping. The overhead touchscreen controller allow the operator to visualize the set-up and execute tooling changes fast and effectively. Most ... read more...

Wood Mizer Products Inc.

AWMV by Wood-Mizer introduces three new moulders to its line. The new four-, five- and six-spindle machines are all available with universal heads as well as many other options. AWMV moulders are an excellent ... read more...

The AWMV Industrial Products display will showcase the workhorse of their moulder line-the M15236 six spindle moulder. This feed-through moulder features 6 1'2" x 9" capacity, and simple set ups. Easy to run, ... read more...

AWMV Industrial Products offers a complete line of affordable, high-value moulders, tooling and support. A division of Wood-Mizer, AWMV is focused on making machines that make you money. AWMV teams with you to ... read more...

Show More

AWMV Industrial Products will be displaying a selection of moulders, as well as resawing solutions, at IWF. AWMV moulders are world-class machines, built rugged, designed to last, easy to set up and use, and ... read more...

European Woodworking Machinery Co.

TAGLIABUE edge sanding machines can be customized for applications such as shaping, routing and foil stamping for five-piece door production, and are used by the largest furniture and kitchen door manufacturers in ... read more...

U.S. Concepts Inc.

US Concepts Inc. offers full line of Arch Moulder for radius work of parts such as casings, crowns etc. The line includes 5-, 6- and 8-in. capacity machines. Floating feed system with five powered feed rolls ... read more...

US Concepts Inc. introduces the FAS Series Universal Arch Moulder for curved and straight mouldings. This heavy-duty machine consistently cuts curved profile by using a floating feed system that registers on the ... read more...

IMA America Corp.

BIMA 310 Flat Table The IMA BIMA 310 FT represents CNC technology and nested based manufacturing combined with traditional heavy-duty German manufacturing techniques. Both flat vacuum table and bench and vacuum ... read more...

FBA Concept from IMA America Corp. is a through feed processor used for panel sizing and profiling on various raw materials such as chipboard, MDF, OSB, solid wood, plywood and other material. For sawing, ... read more...

IMA HKA contour bander IMA America Corp. offers the HKA contour bander, which brings a unique new concept to the manual edgebanding of contour parts. With it's dual banding methods, it allows customers to ... read more...

Show More

IMA America Corp. introduces the Novimat Concept series of single sided edgebanders. The Novimat Concept is the heaviest of the standard single sided edgebanding lines from IMA. The Novimat Concept can be designed ... read more...

The IMA Novimat Concept single-sided automatic edgebander is a machine for jointing, edgebanding and finishing in throughfeed operation, handling coil material up to 3mm thickness and solid wood strips up to 20mm ... read more...

IMA BIMA Work Centers The IMA BIMA Work Centers feature a new technology, which mitres and glues a continuous edging tape with a butt-joint to a rectangular panel. The edgebanding on panels in one automatic pass ... read more...

Wadkin North America

Wadkin's K23 moulder Wadkin's K23 moulder comes in a standard 6-head format with a host of time saving features, assisted by safe and convenient on-line controls, the company says. The machine has mechanical ... read more...

Wadkin SXJS The SXJS moulder from Wadkin features surface finish quality at 400 ft./min., says the company. Pneumatic loading to all top and bottom feed rolls provide for positive through feed. (518) read more...

The 9000 Series by Wadkin Wadkin North America offers the XE 9000 series of moulders, which it says offers users the best of both worlds: a jointed finish at speeds of up to 200 FPM or a single-knife finish in ... read more...

RazorGage, Technical Services Inc.

The new Cyclone 500 upcut saw by RazorGage is designed for safety, cut quality, accessibility and reliability. Patent-pending design requires two hands to initiate the saw cycle while allowing operator to crowd ... read more...

Safranek Enterprises, Inc.

Safranek dentil molding The effort involved in creating dentil molding prompted one customer to ask Leland Safranek to design and build a custom machine to automate the process. Developing the machine turned ... read more...

Safety Speed Manufacturing

The 72GP Edgebander boasts features available in larger, more expensive machines but in a compact and affordable package. The 72GP features a micro adjust tape guide for quick tape changes, electromagnetic end ... read more...

Northfield Foundry & Machine Co.

Northfield Planers Northfield offers american made single head screw bed planers in 24", 30" and 36" widths. Heavy cast iron construction is featured as are powered upper and lower feed rollers. The feed drive ... read more...

REHAU Inc.

We've transformed edgebanding into T-molding. REHAU now offers the entire Express Collection FlexEdge semi-rigid edgebanding program in T-molding form that can be applied to virtually any work surface. With ... read more...

Invicta USA

Invicta Planers Invicta offers two models of single surface planers. Both machines come standard with cast iron frame, power raise and lower of table, sectional infeed roller and chipbreaker, four knife ... read more...

Single Spindle Shaper The Invicta line of equipment offers the Model TI-14 Single Spindle Shaper in four versions. All versions feature a 7-1/2 HP 3-phase motor, 1-1/4" and '" diameter spindle capacity, cast ... read more...

Invicta TI-14 Single Spindle Shaper The Invicta line of equipment offers the Model TI-14 Single Spindle Shaper in four versions to fit every woodworker's needs. All versions feature a 7-1/2 HP 3-phase motor, ... read more...

RfsProtech, LLC

The PT Veneer Forming systems, produced by RfsProtech, are used in the manufacturing of radial components for industries including window, door and cabinets. The PT Series ends the need for fixtures and forms for ... read more...

RfsProtech's SL Series of Slant Bed Gluers is use to clamp and cure components for a variety of applications including kitchen cabinets, door frames, and stairs. The SL model is compact and requires minimal floor ... read more...

Fletcher Machine Inc.

FM 203 Bluff Cut Machine The Fletcher Machine 203 Bluff Cut Machine is used when large single drawer fronts need to have the appearance of multiple smaller drawers. The machine scores the part, machines an ... read more...

FM 85 Table Top Foiler Oval, serpentine, and other random parts with limited edge shapes can be precisely foiled with FM 85 from Fletcher Machine. Simply change patterns and wheels to match your shapes and ... read more...

Fletcher FM 87 Moulding Foiler Designed for manufacturers of picture frames, and mouldings, the FM 87 applies and moulds foil to shaped edges. Fletcher Machine offers the FM 87 standard with from one to six ... read more...

Show More

Fletcher double sided machines Fletcher Machine Co., Inc. offers double sided machines designed for sizing, scoring, shaping and sanding with foiling. Fletcher double side banders can attach bands ranging from ... read more...

The FM-2000 Contour Edgebander, from Fletcher Machine, runs strip veneer or plastic, coil rolls of PVC melamine or wood veneer. Hot melt glue is gravity fed from the FM-2000's overhead glue pot which features two ... read more...

Fletcher Machine's FM-220 Fletcher Machine manufactures tenon machines in a variety of models with options and configurations to fit your requirements. Standard configurations include trimming, scoring, top and ... read more...

Fletcher Machine offers the FM 240 D, a special door part machine that trims and copes 2- to 5-in. wide door parts from 6 1/2- to 36-in. lengths. The machine has a hopper feed with an integrated return for a small ... read more...

Fletcher FM-240 Tenoner FM-240 Tenoner This new addition to the proven line of Fletcher Double End Tenoners features linear ways and ballscrews for fast changeover, and is available in a number of ... read more...

Fletcher FM-330 The Fletcher FM-330 tenoner features a touch screen that all but eliminates operator training, the company says. Graphic displays aid in ease of operation. Pentium based, the FM-330 runs on ... read more...

Built to fit the needs of specific customers, the FM-45 from Fletcher Machine bands conventional materials including veneers, laminates and lumber bands up to 1/2 in. in thickness. It also applies 3mm PVC and ... read more...

Metabo Corp.

Metabo Ho0882 Planer Metabo Corporation has introduced the Model Ho0882 Planer designed for edge and surface planing. It features a 6.5-amp motor that generates a no-load speed of 12,000 rpm. The double-sided ... read more...

Metabo Corp. has added a 10" miter saw to its new line of woodworking tools. The KGS 303 10" Dual Bevel Sliding Compound Miter Saw is ideal for cutting down crown molding, picture frame moldings, and 2x4s or 4x4s, ... read more...

Logosol Inc.

Logosol PH 260 Logosol Inc. offers the PH 260 4-Head Planer/Moulder. It features a small footprint of 43 by 35 in and weighs 800 lbs. Most setups can be accomplished in 20 minutes or less. There are over 80 knife ... read more...

Logosol Woodworkers Mill Logosol Inc. will be showcasing the Woodworkers Mill at AWFS. The sawmill?s durable, weatherproof, extruded aluminum frame weighs 85 lbs. The mill will support a log up to 8-ft. maximum ... read more...

RIKON Power Tools

RIKON's Universal Mini Lathe Stand #70-910 RIKON's Mini Lathe Stand can be assembled to fit many popular mini lathes on the market today. The stand is constructed with a rugged square steel frame, large solid ... read more...

RIKON Electronic Variable Speed Lathe RIKON's Woodfast Series 20" x 36" Electronic Variable Speed Lathe Model #70-500 features a 20 in. swing and 36 in. distance between centers. The swing over the tool rest is ... read more...

RIKON Power Tools offers the #70-100 Woodfast Series Mini Lathe. The #70-100 offers a small knock out bar. Model #70-100 features a 12-in. swing and 16-in. distance between centers. The increased height offers a 9 ... read more...

Protech Machinery Inc.

Pro-Tech Machinery Co. offers the PT-6 radius former, which is equipped with full CNC setup and operations for high production. read more...

Virutex.com

Virutex introduces the newly patented Abrasive Curve Planer CE123N. It is ideal for use on flat and curved surfaces for shaving and sanding where regular planer blades might not work without chipping. The CE123N ... read more...

Virutex.com offers the 17 lb. CE24E door planer, which features an 18-in. housing, 3-in. wide reversible, self indexing blades and a cutting width of 3 in. The 110 volt, 12 amp planer cuts at 13,000 rpm. read more...

The 110 volt Model CO49J automatic laminate/veneer slitter from Virutex.com runs at a speed of 32 fpm, and features easy to change wheel cutters. read more...

Show More

Virutex.com offers a new laminate-veneer slitter. The new model CO15L, replacing Model CO15E, has a precise micrometric fence adjuster giving more stability when cutting at different widths, says the ... read more...

Virutex EB25 edgebander Virutex offers the EB 25 hot air edgebander, which is designed for edgebanding preglued wood veneer, melamine, and PVC tapes up to 3/ 64-in. thick for the small shop. The machine features ... read more...

EB35 edgebander The Virutex EB35 is a hot air edgebander for tapes of 1, 2 and 3mm thick and preglued laminate strips. Trims top and bottom with cutter heads of 10 or 45 degrees bevel. A scraper set will do the ... read more...

Virutex introduces the EBGB10, a hot melt glue pot edgebander for straight and curver boards with electronic automatic feeding system. The EBGB10 has a short warm up time and can be used as a portable or ... read more...

Virutex shaper The FR98H shaper machine from Virutex is designed for shaping the edges of longitudinal beams and crossbeams and modelling coffered ceilings. Factory-fitted with straight blades for bevel-edging, ... read more...

Virutex offers the PEB50, a portable glue pot edgebander for small shops. The PEB50 has adjustable temperature and is a hot melt glue pot edgebander for straight and curved boards with an electronic automatic ... read more...

Base cutter from Virtuex Virutex's base cutter is specially designed for cutting doors, door frames, base boards and skirtings. It is ideal for installers of wood or other floor coverings like carpets or tiles. ... read more...

Virutex Pregluer for Tapes The new PR25P is for pre-gluing tapes, made with different materials and of different dimensions, for their use on an edgebander for pre-glued tapes, including Virutex models EB5C, ... read more...

Maxym Technologies, Inc.

Maxym Technologies has designed and manufactured CNC machinery in Southern Maine since 1989. The company's latest product combines the features of a CNC mortiser and tenoner, creating our most economical ... read more...

Maxym Combo Maxym Technologies offers one of the newest additions to its line-up, the Maxym Combo. Based on the 48- or 96-in. mortiser platform, the company has combined mortising and tenoning on the same ... read more...

Maxym Tenoner Maxym Industries Inc. offers the Maxym Tenoner, which features touch screen programming with tenon set-up in under 30 seconds. The unit has a production rate of 300-500 tenons per hour and ... read more...

Show More

Mortise/Tenon Machine Maxym Technologies introduces a combination Mortise/Tenon Machine. Maxym has combined its easy-to-use CNC touch screen technology with extended 3-in. mortise and tenon capabilities. The ... read more...

Maxym CNC Mortiser Maxym Technologies Inc. introduces the NEW Maxym CNC Mortiser. This is the perfect compliment to the very successful Maxym Tenoner. Like the tenoner this machine feature our exclusive touch ... read more...

Powermatic

The Powermatic 4224B lathe is 950 lbs., and its headstock, tailstock and sturdy legs are constructed of heavy-duty cast iron. Legs are equipped with 2 in.-diameter adjustable feet for leveling. The headstock ... read more...

POWERMATIC; inroduces the Model 201HH to its family of 22-in. planers. It's equipped with a helical cutterhead assembly incorporating 150 four-sided knife inserts that produces a smoother, finer finish than ... read more...

The POWERMATIC; PM2700 Shaper was designed to make woodworking projects run smoothly and efficiently. Theextra large 30 x 40 precision-ground, cast iron table is solidly built to provide stability, while ... read more...

Show More

POWERMATIC; 15HH and 209HH Planers WMH Tool Group, a leading manufacturer of woodworking tools, introduced the new POWERMATIC; 15HH and 209HH Planers with Byrd Shelix Cutterheads. The addition of the cutter head ... read more...

POWERMATIC; PM2700 Shaper The new POWERMATIC; PM2700 Shaper has an extra large 30" x 40" precision ground cast iron table with a heavy duty miter gauge and an aluminum extruded support. The extruded aluminum ... read more...

Danray Products LLC

Danray Products LLC recently introduced 12", 18", and 24" steel lathe chuck shields for lathes or similar machines. These heavy-duty 14-gauge steel lathe chuck shields serve two basic functions: (1) they provide a ... read more...

PAM Fastening Technology, Inc.

A rugged Inmes IM-350 Double Miter Saw from PAM Fastening Technology has been introduced that makes quick work of cutting small and large moulding applications. The PAM Fastening IM-350 double miter saw was ... read more...

PAM Fastening's "One-Source Package" for frame assembly PAM Fastening introduces a new "one-source package" for wide moulding applications that includes the Brevetti PRISMA MAXI saw and S30ME joining machine. ... read more...

Macoser, Inc.

Macoser BVM mortiser Macoser Incorporated offers the BVM vertical mortiser, which is designed to carry out slots of different lengths and depths on window pieces, shutters and doors. The BVM features an ... read more...

Macoser, Inc. offers the Centauro BD1-PE2 electronic chisel mortiser, which is designed to automatically produce mortises on doors, windows, stairs and/or furniture components. According to the company, ... read more...

Multimatik 1300 from Macoser Macoser Incorporated offers the Locatelli Multimatik 1300 SE-CC, a fully hydraulic automatic lathe equipped with one fixed gouge for predowelling and two hydraulic copiers with stroke ... read more...

Show More

Simple to operate CNC controlled dovetailer. 40 Boxes per hour production capability. read more...

CNC Controlled Dovetail Machine. Variable pitch with computerized features. read more...

Omec SCM 1200 hydraulic powered drawer box clamp providing 1700 psi closing pressure. read more...

Baker Products

Baker Products proudly introduces the model BL6-23 four-side, 6-head spindle moulder. It is compactly constructed while offering powerful cutting capability and a centralized operator control panel. It can process ... read more...

The Baker Model AN-24 Automated Single Surface Planer features a helical cutter-head with rotate-able four-sided TCT knives, allowing for eight times the cutter-head life beyond conventional, straight-blade cutter ... read more...

Baker Product's Model M-412, 4-Side Moulder/Planer was designed for quick and easy set-up and adjustment. It can plane material up to 13 in. wide and 3/8 in. to 9 in. thick; 2-side plane/mould up to 12 inc. wide ... read more...

Diehl Machines

The new Diehl 5000 Series moulder targets the experience wood moulding processor whose requirements dictate more choices in selecting the best spindle configurations and accessories, for the most demanding ... read more...

The Challoner CNC Double End Tenoner is available in either a two, four or six post chassis. A complete range of tooling units (trim, score, tenon, cope and dado) can be automatically set by D.C. brushless servo ... read more...

Challoner Double End Tenoners from Diehl Machinery are available in either two, four or six post chassis. The traditional Challoner feed system and heavy construction assures unmatched precision in double end ... read more...

Show More

The Challoner Vector Double End Tenoner from Diehl is available in either a four- or six-post chassis. The traditional Challoner feed system and heavy construction assures unmatched precision in double-end ... read more...

Diehl TL-45 turning lathe The TL-45 automatic turning lathe from Diehl Machines is equipped with a PLC control system with O.I.T. operator interface, which provides control of the feed speed, depth and ... read more...

Jenkins Systems

Jenkins 2100 Series CNC machine Jenkins Systems offers the servo driven 2100 Series CNC double end tenoner, which features electronic squaring, modular design and 100 percent graphical user interface. read more...

Jenkins Double End and Single End Tenoners Jenkins Double End and Single End Tenoners utilize proven technology, precision feed chains and structurally solid designs. Exclusive True-Blend contouring reduces ... read more...

Jenkins shaping machine Jenkins Systems offers a CNC shaping machine designed for demanding cabinet door manufacturing requirements. The dual counter rotating spindles allow for a power cut in both directions, ... read more...

Show More

Jenkins Double End and Single End Tenoners utilize proven technology, precision feed chains and structurally solid designs. Exclusive True-Blend contouring reduces sanding and improves product finish. Minimize ... read more...

Jenkins Systems dual and single spindle CNC shapers produce all five components of cabinet and architectural doors as well as valances, delivering cutting-edge efficiency and precision, the company says. Exclusive ... read more...

Jenkins Dual Spindle Shaper The Jenkins Dual Spindle Shaper is capable of manufacturing all five door components, including arching, eliminating the need for templates. Standard with seven common arches, options ... read more...

Jenkins Systems Next Generation Dual Spindle CNC Shaper produces all five components of cabinet and architectural doors as well as valances, delivering cutting edge efficiency and precision. Exclusive True-Blend ... read more...

Panhans Machine Company Inc.

Panhans 245 shaper Panhans Machine Company, Inc. offers the 245 programmable shaper. It tilts 45 degrees in both directions. It features a 6-in. spindle stroke, 2 or 4-axis programmable control, electric ... read more...

Biesse America

The Polymac and BIESSEEDGE product line from Biesse Wood Division contains a wide range of single-sided and double-sided edgebanding machines that satisfy the high-quality edgebanding needs of small to mid-size ... read more...

Biesse America introduces the Akron 400 at IWF 2008. Designed specifically for entry-level to mid-sized businesses, the Akron 400 is an automatic single-sided edgebander suitable for applying banding material in ... read more...

Biesse Excel Series New to the Biesse line, the Biesse Excel Series is a numerical control milling machine sized to work solid wood and its derivatives, composite materials, plastics and nonmetal alloys. ... read more...

Show More

Ergho 7 from Artech Polymac and the Artech Divsion of Biesse America offer the Ergho 7 edgebander, which features two speeds: 9 and 18 mph. The Ergho 7 is equipped with a PLC for quick set-up and chaneover, and ... read more...

Biesse's Ergho edgebanders The Polymac Ergho II, III and IV from the Artech Division of Biesse America are all able to apply edges from 0.4mm to 15mm including 3mm PVC. The machine has a heat-up time of less than ... read more...

Biesse POLYMAC LATO 245 POLYMAC LATO 245 Edgebander with "patented" Corner Rounding and glue pot VC-500, edge feeding and pressing system allows optimum results. It also features the end trimming unit IN-501 to ... read more...

Millennium from Biesse Biesse Group America offers the numerically controlled Millennium edgebanding center, which is designed for application of straight ABS or PVC strips on panels with shaped profiles. ... read more...

The Akron 800 automation, provided by the numerical control, allows immediate changes in machining operation simply by calling up the program required. The multifunction work units help to eliminate downtime when ... read more...

The AKRON Series machine covers the medium to large companies or companies looking for a totally flexible machine for today's demanding market. The AKRON machine comes in several lengths, and can be totally ... read more...

Biesse America announces the exhibition of the ROVER C EDGE at IWF 2008. The Rover C Edge is a machining center designed for routing, drilling and edgebanding of contoured panels with a single machine. The Rover C ... read more...

Biesse Stream edgebanders Biesse?s Stream series of edgebanders, the SB1 and SB2, are single- and double-sided machines respectively that feature a patented, new two-part glue system. The glue system is removable ... read more...

Biesse offers Stream SB edgebander The Stream SB double-squaring and edgebanding machine from Biesse features a monolithic base, central suction system, and a modular system for arrangement of the operating ... read more...

Casadei-Busellato

The Flexa 27 Edgebander from Casadei-Busellato is available with pneumatic position of the end trim, scrape unit, and two pneumatic positioning of the top and bottom trimming unit. It is designed for quick ... read more...


KCD Green Shirt Guy

GracoWebinarSidebar

Anest Iwata LV Technology

Dynabrade 2014 Sidebar1

Milesi 1

Renner Logo Sidebar Ad2

Stiles Machinery CNC Edge Bander Planer Inventory Control Frame Construction Dust Collection
Finishing Symposium Ad
Cefla Sidebar 2014
Gemini Sidebar Ad 2014